Reliable, Easy to Use Design Software
SkyCiv Reinforced Concrete Design Software analysis
Capabilities for modelling and analysing simple to complex structures.
Quick structural modelling
Integrated seamlessly with Structural 3D, the Reinforced Concrete Design module supports concrete beam design and column design for a variety of building codes.
This powerful reinforced concrete design software helps engineers quickly run and optimize section calculations across full 3D models. For deeper verification, detailed hand calculations are available to review every step. The integrated General Section Designer also makes it simple to lay out rebar and design custom-shaped sections.
WHY ENGINEERs SWITCH
Structural analysis software that runs the full workflow
Easy and powerful FEA analysis
Run linear, non-linear, buckling and dynamic analysis within a single solver. No separate modules for complex analysis types.
Integrated design checks
Steel, concrete, timber and cold-formed design modules run directly on your analysis results. No exporting, re-entry or version mismatches.
Detailed calculation reports
Every formula, design check and
reference is shown in full, so you can defend every number, not just the result.
WHY ENGINEERs SWITCH
What SkyCiv Reinforced Concrete Design Software offers
Capabilities for modelling and analysing simple to complex structures.
Add beams, rebar, and loads within minutes
Create detailed structural models using flexible tools designed for engineering workflows
Run complete Reinforced Concrete beam design and RC column design for ACI 318, EN2, CSA, A23, BS 8110, and AS 3600.
Fully built into SkyCiv 3D Structural Analysis Software and Beam Software, or add your own beam input.
Add, edit and remove longitudinal and shear rebar, with graphics.
Add multiple layers of top, bottom, and stirrup reinforcement.
Import multiple load combinations from US, UK, EU, CAN, and AUS libraries.
Add in forces or use SkyCiv analysis software to pull in results.
A clear summary of results with green and red pass/fail results.
Helpful documentation, including verification models.
Detailed calculation reports
SkyCiv believes engineers should have access to all the information about their designs. This includes the calculations made by the software and is a key part of how we support effective concrete structure design software workflows. The reports detail:
References to relevant chapters and checks (for ACI 318, EN2, CSA A23, BS 8110, and AS 3600).
Custom Company logo and model setup information.
Detailed calculations of plastic centroid values.
Relevant assumptions and failure criteria.
Clear pass/fail summary results.
Download Sample Reinforce Concrete Calculation Report.
Custom section design
The SkyCiv General Section Designer module allows you to add reinforcement and loads to test your section’s moment and axial capacities. Design your concrete sections easily, using SkyCiv General Section Designer:
Add template or custom shapes via Section Builder.
Easy reinforcement input and editing capabilities.
Load in common materials, or add your own custom materials.
Apply multiple loads, testing more than one case in one go.
Review moment and axial capacities, stress/strains, stress contours, and utility ratios.
Review real-time M-N interaction curves.
Integrated with SkyCiv Structural 3D
With nothing to download or install, you can instantly pull the forces, spans, loads, and load combinations directly from your structural analysis model. Instantly check your model for flexure, shear, axial, and much more.
Also fully integrated with SkyCiv Beam.
Forces automatically imported from structural models.
Supports load combinations from ASCE 7-10, AS 1170, EN1 and NBCC.
Spans, cross-sections and materials imported from your model.
Class and group members together, to complete one design for multiple members.
Reinforced concrete slab design
SkyCiv also has powerful slab design capabilities for ACI 318, AS3600 and EN2 for concrete slab and plate design. This is available under our slab design module, which includes the following features:
Automatically imports materials and analysis results from S3D.
Automatically imports cutouts, mesh and plate attributes from S3D.
Assign different reinforcement zones.
Design and optimize reinforcement.
Review moment and axial capacities, stress/strains, stress contours, and utility ratios.
supported standards
Globally Supported Design Standards
Capabilities for modelling and analysing simple to complex structures.
DESIGN STANDARDS
Structural design codes
Complete support for local design standards across steel, concrete, timber and more
| Category | Supported Codes |
|---|---|
| Steel design | AISC 360, AS 4100, CSA S16, BS 5950, Eurocode 3 (EN 1993), IS 800, NZS 3404 |
| Reinforced concrete | ACI 318, AS 3600, Eurocode 2 (EN 1992), CSA, BS |
| Timber design | NDS, AS/NZS 1720, Eurocode 5, CSA |
| Cold-formed steel | AISI, Eurocode, AS/NZS 4600 |
| Connection design | AISC 360, Eurocode, AS 4100 |
| Wind and seismic loading |
the skyciv difference
Make the Switch to SkyCiv
Everything your team needs to work faster,
from anywhere.
Work faster with integrated workflows
Your model integrates with more tools, saving you time and energy. Design faster, smarter and with less margin for error.
Skip the Installation
SkyCiv runs entirely in the cloud. No downloads, updates, or IT setups are required. Simply log in from any browser and start working instantly.
Engineering Support
When issues arise, our qualified engineers will quickly help you resolve them, keeping your projects on track without delays or downtime.
Easy input, easy output
SkyCiv models take minutes to set up, and the results are all clearly labelled – accompanied with detailed design reports for full calculation transparency.
Powerful Integrations,
Zero Disruption
testimonials
Trusted by thousands
The ease of use and the presentation of the results are both awesome. I have had ongoing interaction with the support team and everyone is excellent.
Mitch Frumkin
CEO OF KIPCON
It is used for various civil and mechanical engineering courses and the students love it. We are happy with the continuous updates to SkyCiv as well, highly recommended.
Dr Kenneth R. Leitch
Assoc. Prof. at Texas A&M
It was easily the most intuitive package available to learn; it is particularly easy to build the 3D model and define nodes, members, supports, materials, sections, then apply loads & combinations.
Stuart Agars
Managing Director of Struct-Sure Limited
SkyCiv has been a great tool to help efficiently and clearly document and update design results for a member of a small company with multiple responsibilities.
Lydia Fahrenkrug
Engineer at MT Solar
case studies
Real projects using SkyCiv
PRICING
Access SkyCiv Quick Design
Flexible plans for every team size.
No lock-in contracts, cancel anytime.
Get in Touch
Location
Unit 510, 55 Holt Street Surry Hills
NSW 2010 Australia
