SkyCiv钢筋混凝土设计软件

ACI 混凝土设计软件 318, 作为 3600, BS 8110, CSA A23, 和EN 2 具有清晰且代码引用的报告.

立即免费开始

Low-angle view of a tall glass skyscraper with reflective windows against a clear blue sky.

可靠, 易于使用的设计软件

SkyCiv Reinforced Concrete Design Software analysis

Capabilities for modelling and analysing simple to complex structures.

Quick structural modelling

与 Structural 3D 无缝集成, 钢筋混凝土设计模块支持各种建筑规范的混凝土梁设计和柱设计.

这款功能强大的钢筋混凝土设计软件可帮助工程师快速运行和优化完整 3D 模型的截面计算. 为了更深入的验证, 详细的手工计算可用于查看每一步. 集成的通用截面设计器还可以轻松布置钢筋和设计定制形状的截面.

Laptop screen displaying SkyCiv structural design software: left panel with blue UI and buttons, right panel a 3D frame model in green, orange, and blue lines.

WHY ENGINEERs SWITCH

Structural analysis software that runs the full workflow

Easy and powerful FEA analysis

Run linear, 非线性的, buckling and dynamic analysis within a single solver. No separate modules for complex analysis types.

Integrated design checks

钢, 木结构, timber and cold-formed design modules run directly on your analysis results. No exporting, re-entry or version mismatches.

详细 calculation reports

Every formula, design check and
reference is shown in full, so you can defend every number, not just the result.

WHY ENGINEERs SWITCH

What SkyCiv Reinforced Concrete Design Software offers

Capabilities for modelling and analysing simple to complex structures.

添加梁, 钢筋, 并在几分钟内加载详细的计算报告定制部分设计与SkyCiv结构3D集成钢筋混凝土板设计

添加梁, 钢筋, 并在几分钟内加载

Create detailed structural models using flexible tools designed for engineering workflows

Run complete Reinforced Concrete beam design and RC column design for ACI 318, EN2, CSA, A23, BS 8110, 并作为 3600.
Fully built into SkyCiv 3D Structural Analysis Software and Beam Software, 或添加自己的光束输入.
加, 编辑并删除纵向钢筋和剪切钢筋, 带有图形.
添加多层顶部, 底部, 和箍筋加固.
从美国进口多种荷载组合, 英国, 我, 能够, 和澳大利亚图书馆.
添加力量或使用 SkyCiv 分析软件来获取结果.
带有绿色和红色通过/失败结果的清晰结果摘要.
Helpful documentation, including verification models.

Screenshot of SkyCiv RC Layouts interface (ACI 318-19 BETA) showing a Tee-shaped concrete member with dimensions, material properties, a layout diagram with rebar pattern, and the Rebar Layers panel.

详细的计算报告

SkyCiv 认为工程师应该有权访问有关其设计的所有信息. This includes the calculations made by the software and is a key part of how we support effective concrete structure design software workflows. 报告详细内容:

参考相关章节和检查 (对于ACI 318, EN2, CSA A23, BS 8110, 并作为 3600).
定制公司徽标和型号设置信息.
塑料质心值的详细计算.
相关假设和失效标准.
清除通过/失败摘要结果.
下载示例钢筋混凝土计算报告.

Screenshot of SkyCiv structural design interface with a PDF page showing beam design equations and a small crack-width diagram.

定制部分设计

The SkyCiv General Section Designer module allows you to add reinforcement and loads to test your section’s moment and axial capacities. 轻松设计您的混凝土部分, 使用SkyCiv一般部分设计器:

通过节生成器添加模板或自定义形状.
简单的钢筋输入和编辑功能.
装入普通材料, 或添加您自己的自定义材料.
施加多个载荷, 一口气测试多个案例.
检查力矩和轴向承载力, 压力/应变, 应力等值线, 和效用比率.
查看实时M-N相互作用曲线.

Dialog titled 'Column M-N Interaction Curves' showing a 3D interaction surface with colored axes and a 2D circular plot on the right.

与SkyCiv结构3D集成

无需下载或安装, 您可以立即拉动力量, 跨度, 负载, 并直接从您的结构分析模型中加载组合. 立即检查您的模型是否弯曲, 剪力, 轴向的, 以及更多.

还与 SkyCiv Beam 完全集成.
从结构模型自动导入力.
支持ASCE的荷载组合 7-10, 作为 1170, EN1和NBCC.
跨度, 从您的模型导入的横截面和材料.
班级和小组成员在一起, 为多个成员完成一项设计.

SkyCiv structural design interface: left panel shows a member details form and a circular geometry diagram; right panel displays a 3D purple wireframe frame with orange support members.

钢筋混凝土板设计

SkyCiv 还具有强大的 ACI 楼板设计功能 318, AS3600 和 EN2 用于混凝土板和板设计. This is available under our slab design module, 其中包括以下功能:

自动从 S3D 导入材料和分析结果.
自动导入剪裁, 来自 S3D 的网格和板属性.
分配不同的加固区域.
设计和优化钢筋.
检查力矩和轴向承载力, 压力/应变, 应力等值线, 和效用比率.

3D isometric view of a multi-story reinforced concrete model with red floor slabs and colored reinforcement map, showing structural analysis results in SkyCiv.

立即免费开始

supported standards

Globally Supported Design Standards

Capabilities for modelling and analysing simple to complex structures.

DESIGN STANDARDS

Structural design codes

Complete support for local design standards across steel, 木结构, timber and more

类别	Supported Codes
Steel design	AISC 360, 作为 4100, CSA S16, BS 5950, EUROCODE 3 (在 1993), 是 800, 新西兰移民局 3404
钢筋混凝土	ACI 318, 作为 3600, EUROCODE 2 (在 1992), CSA, BS
木材设计	NDS, AS / NZS 1720, EUROCODE 5, CSA
冷弯型钢	AISI, EUROCODE, AS / NZS 4600
连接设计	AISC 360, EUROCODE, 作为 4100
Wind and seismic loading

观看 SkyCiv RC 设计演示

Tutorial’s Library

the skyciv difference

切换到SkyCiv

Everything your team needs to work faster,
从任何地方.

Work faster with integrated workflows

Your model integrates with more tools, saving you time and energy. Design faster, smarter and with less margin for error.

Workflow diagram showing completed steps: Model1, Analysis, Design, leading to Report (all steps marked complete).

跳过安装

SkyCiv完全在云中运行. 没有下载, 更新, 或需要设置. 只需从任何浏览器登录并立即开始工作.

工程支持

出现问题时, 我们合格的工程师将迅速帮助您解决它们, 使您的项目无需延迟或停机时间.

Two chat bubbles with avatars on a glowing backdrop: white message questions a mismatched steel-column load combination; blue reply explains wind load factors for serviceability.

UI panel showing a test results list; highlighted row reads 'Combined Action Ratio' with 0.87, reference AISC 360-16 H1-1a, status PASS.

Easy input, easy output

SkyCiv models take minutes to set up, and the results are all clearly labelled – accompanied with detailed design reports for full calculation transparency.

强大的集成,
Zero Disruption

Plus an open API to build your own custom solutions

强大的集成,
Zero Disruption

testimonials

受到数千人的信赖

160 +

使用SkyCiv的国家

30 分

Average response time

易用性和结果展示都很棒. 我与支持团队保持持续交流，他们每一个人都非常优秀.

米奇·弗鲁姆金（Mitch Frumkin）

CEO OF KIPCON

这很容易成为最直观的学习包; 尤其是在构建 3D 模型, 构件, 支持, 材料, 截面, 然后施加载荷 &放大器; 组合.

斯图尔特琼脂

Struct-Sure Limited 总经理

在多个土木与机械工程课程中都有应用，学生们都很喜欢. SkyCiv 的持续更新也让我们很满意, 强烈推荐.

肯尼斯·R博士. 雷奇

副会长. 教授. at Texas A&m

SkyCiv has been a great tool to help efficiently and clearly document and update design results for a member of a small company with multiple responsibilities.