WHY ENGINEERs SWITCH
Structural analysis software that runs the full workflow
Easy and powerful FEA analysis
Run linear, 非线性的, buckling and dynamic analysis within a single solver. No separate modules for complex analysis types.
Integrated design checks
钢, 木结构, timber and cold-formed design modules run directly on your analysis results. No exporting, re-entry or version mismatches.
详细 calculation reports
Every formula, design check and
reference is shown in full, so you can defend every number, not just the result.
WHY ENGINEERs SWITCH
What SkyCiv Truss and Frame offers
Capabilities for modelling and analysing simple to complex structures.
全手计算
SkyCiv 2D Truss还具有完整的手动计算功能 – which clearly show the step-by-step calculations for both the method of joints and the method of sections. 该交互式学习模块可帮助学生掌握如何解决桁架的手工计算:
步 1: Model your truss in S3D using the Truss Builder.
步 2: 请点击 “解决” 过渡到结果部分.
步 3: 点击 “桁架手计算器” 图片中突出显示的按钮.
步 4: 将弹出一个弹出窗口，显示人工计算结果.
无限加载方案
Design and setup your 2D Truss Analysis with SkyCiv Trusses Calculator or SkyCiv Frame Software:
加起来 10,000 会员
添加无限支持，完全控制他们的约束代码 (即. 使用您喜欢的任何支持类型)
添加无限点载荷
添加无限的分布式负载
添加无限的时刻
SkyCiv 2D桁架
简化的2D桁架分析软件
SkyCiv Truss软件可以添加 10,000 构件, 支持, 和负载相比，自由桁架计算器是有限的
固定性设置为引脚连接 (FFFFRR) 正确的桁架行为
根据需要添加尽可能多的支撑和载荷, SkyCiv Truss可以解决
解决了每个支撑处的反应并将其显示在自由体图中 (FBD)
干净的内部轴向力可产生快速整齐的图表，可用于您的作业或检查结果!
SkyCiv 2D相框
简化的2D帧分析软件
SkyCiv Frame软件可以添加 10,000 构件, 支持, 与有限软件的免费工具相比，负载
固定物设置为固定框架 (FFFFFF)
结果: 支持者的反应, 弯矩, 剪切力和轴向力
对于所有其他结果, users can use SkyCiv Structural 3D which comes with all subscriptions
Add cross-section properties using SkyCiv Section Builder
将生成快速整洁的图表，供您分配作业或检查结果
救, 加载和共享您的文件
桁架系统和框架通常需要很长时间才能设置. 每次要测试时不断输入相同的结构是很痛苦的. That’s why the SkyCiv Roof Truss Calculator and Frame software allows you to save and load from your cloud storage.
由于我们的软件在云端, you can also share and collaborate on models with your team in real-time. 团队合作, 或跨多个设备, with SkyCiv’s cloud truss and frame analysis software.
supported standards
Globally Supported Design Standards
Capabilities for modelling and analysing simple to complex structures.
DESIGN STANDARDS
Structural design codes
Complete support for local design standards across steel, 木结构, timber and more
| 类别 | Supported Codes |
|---|---|
| Steel design | AISC 360, 作为 4100, CSA S16, BS 5950, EUROCODE 3 (在 1993), 是 800, 新西兰移民局 3404 |
| 钢筋混凝土 | ACI 318, 作为 3600, EUROCODE 2 (在 1992), CSA, BS |
| 木材设计 | NDS, AS / NZS 1720, EUROCODE 5, CSA |
| 冷弯型钢 | AISI, EUROCODE, AS / NZS 4600 |
| 连接设计 | AISC 360, EUROCODE, 作为 4100 |
| Wind and seismic loading |
the skyciv difference
切换到SkyCiv
Everything your team needs to work faster,
从任何地方.
Work faster with integrated workflows
Your model integrates with more tools, saving you time and energy. Design faster, smarter and with less margin for error.
跳过安装
SkyCiv完全在云中运行. 没有下载, 更新, 或需要设置. 只需从任何浏览器登录并立即开始工作.
工程支持
出现问题时, 我们合格的工程师将迅速帮助您解决它们, 使您的项目无需延迟或停机时间.
Easy input, easy output
SkyCiv models take minutes to set up, and the results are all clearly labelled – accompanied with detailed design reports for full calculation transparency.
强大的集成,
Zero Disruption
testimonials
受到数千人的信赖
160 +
使用SkyCiv的国家
30 分
Average response time
易用性和结果展示都很棒. 我与支持团队保持持续交流，他们每一个人都非常优秀.
米奇·弗鲁姆金（Mitch Frumkin）
CEO OF KIPCON
这很容易成为最直观的学习包; 尤其是在构建 3D 模型, 构件, 支持, 材料, 截面, 然后施加载荷 &放大器; 组合.
斯图尔特琼脂
Struct-Sure Limited 总经理
在多个土木与机械工程课程中都有应用，学生们都很喜欢. SkyCiv 的持续更新也让我们很满意, 强烈推荐.
肯尼斯·R博士. 雷奇
副会长. 教授. at Texas A&m
SkyCiv has been a great tool to help efficiently and clearly document and update design results for a member of a small company with multiple responsibilities.
莉迪亚·法伦克鲁格（Lydia Fahrenkrug）
MT Solar 工程师
case studies
Real projects using SkyCiv
价钱
Access SkyCiv Quick Design
Flexible plans for every team size.
No lock-in contracts, cancel anytime.